Home / Basics of Fly Fishing / Step 1
Step 1: Identification and Function of Equipment
Selecting a Rod for a Beginner
Fly fishing rods start with the
reel seat where the reel is attached, usually by a threaded ring. The
next section is the handle which is traditionally made of cork. If you
are looking at a fiberglass fly rod with a foam handle in a discount store,
please don't purchase it as you are, more than likely, purchasing a bargain
of troubles. They are extremely difficult to cast even for experienced
casters. After the handle comes the base section of the rod which includes
the manufacturer's recommendation for the proper line weight as well as
noting the length of the rod. You should also find a ring keeper to attach
your fly while you are walking.
The best fly rod for a young beginner would be a graphite rod purchased
in a fly shop for under $200. The most commonly recommended fly rod would
be an eight foot rod for a number six weighted line; however, I started
my sons out on an 8' rod for a 4 weight line. It is lighter and will not
wear out a young boy or girl. One disadvantage of a light weight rod is
that it is difficult to cast in the wind. Avoid purchasing a combination
spin and fly rod as they merely compromise the best qualities of each design.
Fly shops incourage customers to cast a number of differnt rods, as some
rods have a faster tip action. It is strictly a matter of preference. My
recommendation would be the new Temple Fork Outfitter's fly rods or an Orvis
fly rod.
Selecting a Reel
A single action reel will serve you best. This reel will have a detachable
spool and a drag adjustment. The drag adjustment is used once you have caught
a fish and all of your loose line has been reeled up on the spool. If the
fish is an especially strong or large fish, he will want to run. When he
does this, he will pull line off of the spool. If your drag is set too light,
the fish will run too far and you may over play the fish. Although the newer
reels have some sophisticated drag systems, the tried and true design is
the common click-pawl system, which uses a triangular piece of metal (pawl)
that clicks on the rotating teeth of a gear.
Do not over play a fish that you wish to release, as long after you have
congradulated yourself on releasing the fish, the stress may later lead
to death. If the drag adjustment is set too tight, the pulling fish may
break the tippet leaving you with "the one that got away story."
Selecting a Fly Line
The weight of each fly line is based on the weight, measured in grams,
of the first thirty feet of line. Somewhere at the base of every fly rod
will be a recommendation for an AFTMA fly line (American Fishing Tackle
Manufacturers Association). All fly lines are rated for taper, weight and
function. Keep in mind that, in most cases, a rod may use a fly line one
number heavier than recommended, although rarely can you use one line under
that which the manufacturer recommends and still cast with ease.
Weights range from 1 to 12 with 6 being the most popular. Line numbers
1-4 are extremely limited in that they are designed for relatively short
casting on calm, flat water with no real wind, and they are accompanied
by long leaders and tiny flies for delicate casting. Line numbers 5-7 are
the most versatile as they may be cast in moderate wind, and yet they still
maintain delicate landings for small flies. The advantage of these weights
is that they are also designed, in conjunction with the rod, to handle heavier
fish in fast water. Practically speaking, there are no disadvantages for
these weighted lines for the majority of fishing conditions with the exception
of salt water fishing. If you are going to be limited to one rod, purchase
a 6 weight.
Line numbers 8-9 are heavy lines for big water and forceful wind conditions.
The advantage of these lines is that you may fish deep with large, weighted
flies and make long casts. Line numbers 10 - 12 are designed for salt water
conditions.
The next designation on the fly line package is an abbreviation for FUNCTION.
You have a choice of floating, sinking and floating with a sink tip. The
floating line is by far the most versatile. If you need to sink a fly, put
on a piece of llead. How much should you spend for a line? If you want to
save money, buy a cheap reel. If you want to limit your casting distance
and watch your fly sink when it obviously should not, buy a cheap line.
Stay with Cortland, Scientific Angler and Rio, and you won't go wrong. Fly
lines deteriorate when they become dirty. They wear out from unnecessary
abrasion. Periodically, clean your fly line in mild detergent, dry it off,
and then take it out in the sun and gently stretch the coilds out of the
line. Warning: sun screen may block out the harful rays of the sun, but
it also melts fly lines!
Regarding
color, Cortland Line Company in their publication, Fly Rod Fishing Made
Easy, recommends a highly visible line for the fisher as it, naturally,
is easier to locate your fly and control your line. Fluorescent lines do
not spook fish -- poor casting does that! Cortland reasons that, "Looking
upward, fish see objects against the light sky -- and it seems to us that
a light colored line would actually be less visible than a darker one."

I highly recommend felt sole wading boots. Waders are a necessity unless you have a tolerance for cold water.
Step 2: Terminal Equipment and Paraphernalia
|
 |
|